WiFi or ISP

Router login

TP-Link router login

How to get into your TP-Link (Archer and Deco) settings, and the three settings that fix most slow Wi-Fi: the channel, a restart, and smart queueing.

How to log in

  1. Connect to its network over Wi-Fi or a cable.
  2. Open a browser and go to tplinkwifi.net, 192.168.0.1, tplinkdeco.net, 192.168.68.1.
  3. Sign in with the admin password (see below).

Archer routers: tplinkwifi.net or 192.168.0.1 (TP-Link also suggests 192.168.1.1 if those fail), or the Tether app. Deco mesh: managed mainly in the Deco app; a web page at tplinkdeco.net or 192.168.68.1 adds some advanced settings and only the owner TP-Link ID can sign in. A VPN or proxy can block the local address.

Username and password

Archer: newer models make you create an admin password on first login; TP-Link says some older models use a pre-filled default. The default Wi-Fi name and password are on the router's label. Deco web page: the password of the owner TP-Link ID account.

Change the Wi-Fi channel

  1. Archer: sign in at tplinkwifi.net, go to Advanced > Wireless > Wireless Settings, pick a Channel (TP-Link recommends Auto unless you have problems), Save.
  2. Deco: only some models allow manual channels (Deco app: More > Wi-Fi Settings > Advanced). Others use More > Network Optimization to pick channels automatically.

Exact menus vary by model and firmware.

Not sure which channel? Here's how to pick a quiet one.

Restart it

  1. Archer: Advanced > System Tools > Reboot (newer UIs: Advanced > System > Reboot), or set a Scheduled Reboot.

Smart queueing (fixes lag under load)

QoS (Archer) / QoS with Scene and Client Acceleration (Deco). Archer: Advanced > QoS, enter your ISP upload/download, then prioritize by device or application (options vary by model). Deco app: More > QoS; HomeShield models offer Scene Acceleration and Client Acceleration, HomeCare models a High Priority mode. Not described as SQM/bufferbloat control.

Test for bufferbloat before and after turning it on.

Firmware updates

Archer: Advanced > System Tools > Firmware Upgrade (Online Upgrade or upload a file). Deco: Deco app > More > System > Update Deco, or web page Advanced > System > Firmware Upgrade.

Find your router's address on a Mac

  1. Open Apple menu > System Settings, then click Wi-Fi in the sidebar.
  2. Click Details next to the network you're connected to.
  3. Click TCP/IP. The address next to Router is your router's address.
  4. Shortcut: Option-click the Wi-Fi icon in the menu bar; the router address is listed under your network.

Sources

See if your router is the slow part.

WiFi or ISP is a free Mac menu bar app. It times your router and the internet at the same moment, says which side is slow, and keeps a log you can send your ISP.

brew install --cask coreyhaines31/tap/wifiorisp