Router login
Linksys router login
How to get into your Linksys (including Velop) settings, and the three settings that fix most slow Wi-Fi: the channel, a restart, and smart queueing.
How to log in
- Connect to its network over Wi-Fi or a cable.
- Open a browser and go to
myrouter.local,192.168.1.1. - Sign in with the admin password (see below).
Go to myrouter.local or https://192.168.1.1 from a computer on the network (Linksys says a desktop computer is needed for the mesh web interface). You may have to click past a mobile-blocking page and a browser security warning. The Linksys app is the alternative.
Username and password
Enter your router password in the 'Access Velop/Router' field. If it's your first login or you've forgotten it, use Reset Password, which asks for the Recovery Key printed on the bottom of the router connected to your modem.
Change the Wi-Fi channel
- Web: sign in, click Wi-Fi Settings, and set Channel (and Channel width) there.
- App: menu > Wi-Fi Settings > Advanced Wi-Fi Settings > Channel Finder to scan for the best channels (some models re-scan automatically every 5 days).
Settings vary by model.
Not sure which channel? Here's how to pick a quiet one.
Restart it
- Linksys app: Network Administration > Restart Network.
Smart queueing (fixes lag under load)
Media Prioritization / Priority (QoS). Smart Wi-Fi routers have Media Prioritization; some other Linksys routers put it under Applications & Gaming > QoS; Velop's Priority feature lets you pick up to three devices for bandwidth first. Not an SQM/bufferbloat feature.
Test for bufferbloat before and after turning it on.
Firmware updates
Mesh systems update automatically by default (web interface: Router Settings > Connectivity, 'Automatic' box). On Smart Wi-Fi routers automatic updates are off by default and can be enabled in the Firmware Update section.
Find your router's address on a Mac
- Open Apple menu > System Settings, then click Wi-Fi in the sidebar.
- Click Details next to the network you're connected to.
- Click TCP/IP. The address next to Router is your router's address.
- Shortcut: Option-click the Wi-Fi icon in the menu bar; the router address is listed under your network.
Sources
- https://support.linksys.com/kb/article/107-en/
- https://support.linksys.com/kb/article/264-en/
- https://support.linksys.com/kb/article/83-en/
- https://support.linksys.com/kb/article/99-en/
- https://support.linksys.com/kb/article/283-en/
- https://support.linksys.com/kb/article/82-en/
- https://support.linksys.com/kb/article/130-en/
See if your router is the slow part.
WiFi or ISP is a free Mac menu bar app. It times your router and the internet at the same moment, says which side is slow, and keeps a log you can send your ISP.
brew install --cask coreyhaines31/tap/wifiorisp